brand
Sew Saturday 2018
Sew Saturday 2018

Sewing Pattern

Piggy Pincushion

Animals Gifts Home makes Mothers Day Quick makes Sewing Bee Toys
fb-big twitter-big email-bigpin-big

In patriotic red, white and blue, with a sweet curly tail and a ribbon bow, our little Sewing Bee piggy pincushion will make a handsome addition to your workspace.

  • Piggy Pincushion
  • Piggy Pincushion
  Login to download template
Essentials
  1. Blue print fabric, 25cm x 30cm
  2. Red print fabric, 20cm x 25cm
  3. Matching sewing thread • Toy filling
  4. Button, 1.7cm
  5. Pipe cleaner
  6. Air-erasable pen
    1. Print the templates. Cut two bodies and two ears from blue fabric, reversing one of each. Cut two bellies, two ears and a nose from red, again reversing one. Mark the stitch lines, letters and leg darts with an air-erasable pen. Fold back each leg along the centre of the dart line, then stitch along the curve; these stop the legs splaying out.

    2. Pin the bodies together with right sides facing and stitch the back from A to B. Pin the bellies together, along the straight edge, with right sides facing and join together from C to D, leaving a gap in the centre where marked. Press the seam allowance open.

    3. Open out the body. With right sides facing, pin and then tack the top edge of the belly in place, matching the snout and legs up carefully. Machine stitch from E to F. Join the other edge in the same way. Clip the seam allowance at the inside corners of the legs and along the curves. Tack back a 6mm turning around the snout.

    4. Turn right side out through the gap and ease out the seams. Stuff with small tufts of toy filling, using a pencil to push it down the legs. Pin and slip stitch the gap. Pin the red and blue ears together in pairs and stitch from G to H. Trim the seams to 3mm and press back a 6mm turning around the opening. Turn out and press. Fold slightly and stitch securely on the head, where marked

    5. Sew a line of running stitches around the circular nose and pull up. Insert a button, then draw up the thread tightly and fasten off. Slip the covered button into the gap at the snout and stitch in place. Cut a 2cm x 10cm bias strip of fabric. Fold in half and stitch 6mm from the edge. Turn through and insert a length of pipe cleaner. Close up the ends securely. Twist the tail round a pencil to make it curly. Sew in place. Add a ribbon bow.

fb-big twitter-big email-bigpin-big

Other Popular Makes...

Annette Wrap Top

Annette Wrap Top

Garments
Dimensions:
XS-XL (8-16)

Stitching a made-to-measure top like this wrap by Amanda Walker will result in a perfectly fitting garment every time, from

Eve Dress

Eve Dress

Dresses
Dimensions:
XS-XL (8-16)

Adding panels of an interesting fabric like lace gives even the most simply constructed dresses extra oomph. Here, Julia Claridge

Fabric Christmas Crackers

Fabric Christmas Crackers

Christmas
Dimensions:
XS-XL (8-16)

'Tis the season to be festive, and what better way to set the mood than with a set of fabric

Millie Throw

Millie Throw

Garments
Dimensions:
XS-XL (8-16)

Do you ever look around at accessories and other items, and see potential in them as a garment? Here at

Cross-over Bag

Cross-over Bag

Bags
Dimensions:
XS-XL (8-16)

The best weekend is casual and fun, just like the perfect accessory should be. This project is simple to create

Victoria Midi

Victoria Midi

Sew Plus
Dimensions:
XS-XL (8-16)

This simple garment by Amanda Walker truly is a masterpiece. It uses the full width of your fabric for minimal

Piggy Pincushion
 Login to download templates NOW!
Essentials
  1. Blue print fabric, 25cm x 30cm
  2. Red print fabric, 20cm x 25cm
  3. Matching sewing thread • Toy filling
  4. Button, 1.7cm
  5. Pipe cleaner
  6. Air-erasable pen
    1. Print the templates. Cut two bodies and two ears from blue fabric, reversing one of each. Cut two bellies, two ears and a nose from red, again reversing one. Mark the stitch lines, letters and leg darts with an air-erasable pen. Fold back each leg along the centre of the dart line, then stitch along the curve; these stop the legs splaying out.

    2. Pin the bodies together with right sides facing and stitch the back from A to B. Pin the bellies together, along the straight edge, with right sides facing and join together from C to D, leaving a gap in the centre where marked. Press the seam allowance open.

    3. Open out the body. With right sides facing, pin and then tack the top edge of the belly in place, matching the snout and legs up carefully. Machine stitch from E to F. Join the other edge in the same way. Clip the seam allowance at the inside corners of the legs and along the curves. Tack back a 6mm turning around the snout.

    4. Turn right side out through the gap and ease out the seams. Stuff with small tufts of toy filling, using a pencil to push it down the legs. Pin and slip stitch the gap. Pin the red and blue ears together in pairs and stitch from G to H. Trim the seams to 3mm and press back a 6mm turning around the opening. Turn out and press. Fold slightly and stitch securely on the head, where marked

    5. Sew a line of running stitches around the circular nose and pull up. Insert a button, then draw up the thread tightly and fasten off. Slip the covered button into the gap at the snout and stitch in place. Cut a 2cm x 10cm bias strip of fabric. Fold in half and stitch 6mm from the edge. Turn through and insert a length of pipe cleaner. Close up the ends securely. Twist the tail round a pencil to make it curly. Sew in place. Add a ribbon bow.

fb-big twitter-big email-bigpin-big
-->