1 Download and print the templates. For the front pockets, cut royal blue floral fabric, 14cm x 22cm, blue swirl print, 7cm x 14cm, and pale blue floral, 14cm x 17cm.

2 Pin the royal blue and swirl pieces right sides together, and sew a seam. Stitch the swirl and pale blue pieces right sides together, trapping a loop of printed cotton tape in the seam. Sew the seam, topstitch, then press open on the wrong side.

3 Attach printed cotton vertically onto the royal blue fabric, and press. Pin and stitch the wrong side of the front pocket to calico of the same size, using a 5mm seam allowance. Sew spotty bias binding across the top raw edge.

4 Cut yellow fabric, 29cm x 42cm, and printed cotton tape, 43cm long. Pin the tape across the yellow material so that it’s 17cm above the bottom edge of the fabric. Sew across both tape edges using royal blue thread, and press on the wrong side.

5 Interface a section of the spool print, then cut out 12 spools. Place them on the yellow material and stitch around each one in matching thread. Sew three lines of zig zag stitch in three coordinating shades onto the spools, then press the wrong side.

6 Trace the template words onto white tissue paper, pin in place, and use royal blue thread to sew over it twice. Tear the paper away and press the wrong side. Snip pale blue fabric, 10.5cm x 42cm. Cover 44cm of piping cord with turquoise spot bias binding, and pin it between the top edge of the yellow and light blue fabric.

7 Sew across the binding and topstitch the yellow fabric in coordinating thread. Cut royal blue fabric, 36cm x 42cm. Cover 44cm of piping cord with the turquoise bias binding, and pin it between the royal and light blue fabrics. Sew across the binding and topstitch the royal blue fabric in coordinating thread.

8 Pin the pocket across the bottom of the machine cover, then sew a 5mm seam down both sides and along the bottom. Add vertical lines to divide the pockets as you wish. Trim any excess fabric and cord.