Explore our garment sewing patterns, suitable for sewers of all skill levels. Find an array of options to sew everything from on-trend trousers to stylish tops. These garment patterns, crafted by renowned designers, provide the downloadable patterns and instructions you need to bring a wide range of wardrobe essentials to life. Whether you're a seasoned sewist or complete beginner, our quick and easy sewing tutorials make it easy to tackle garment projects with confidence, and learn techniques such as how to create pleats and how to insert sleeves. From casual everyday wear to special occasion ensembles, learn to sew clothing that flatters your figure and aligns with your unique style today.
Main fabric
Front skirt: cut one on fold
Back skirt: cut one pair
Pocket: cut one pair
Pocket flap: cut one pair
Waistband: cut one
Lining
Pocket: cut one pair
Pocket flap: cut one pair
Waistband: cut one
Interfacing
Waistband: cut one
Use a 5mm seam allowance for pocket and pocket flap, and 1.5cm for the rest of the skirt.
Waist measurements:
Small, 68cm
Medium, 72cm
Large, 76cm
Refer to diagrams and use 1.5cm seam allowance, except for neckline, which is 1cm.
Front: Cut a rectangle half the width of fabric x 72cm. Fold in half length-ways and use the guide to cut the neckline.
Back: Cut a rectangle half the width of fabric x 95cm. Fold in half length-ways and use the guide to cut the neckline.
Sleeve: Use a double piece of fabric, 50cm long, and follow the diagram to cut out. Mark, pin the layers and cut both together.
Neck band: Cut a bias strip 5cm x 60cm.
Custom-sized
Cutting lines for sizes 8-16, adjust the fit with button position
Front: cut one pair from cotton and one pair (edge only, see template) from interfacing
Side: cut one pair from cotton
Back: cut one on the fold from cotton
Waistband: cut one each from cotton and interfacing
Front edge facing: cut one from interfacing
1.5cm seam allowance used throughout.
Custom sized
CUTTING GUIDE
Front bodice: cut one on the fold
Back bodice: cut one pair
Sleeve: cut one pair
Front facing: cut one each on the fold in fabric and interfacing
Back facing: cut one pair each in fabric and interfacing
Right front peplum: cut one pair
Left front peplum: cut one pair
Back peplum: cut two pairs
Sunray pleated section: cut one (this section should be hemmed before it is pleated)
1.5cm seam allowance used throughout except the lower edge of the peplum, where a 1cm seam allowance is used.
Front: cut one on fold
Back: cut one pair in fabric;
Button facings: cut one pair in interfacing
Sleeve: cut one pair
Neck band: cut one
Cuff: cut two
1cm seam allowances are used throughout.
Cutting guide
Front: cut one on the fold
Front side panel: cut one pair
Back: cut one pair
Front facing: cut one on the fold from fabric and one from interfacing
Back facing: cut one pair from fabric and one pair from interfacing
Pockets bags: cut one pair
Straps: cut one pair
1.5cm seam allowance used throughout, unless otherwise stated.
CUTTING GUIDE
Front and back: cut two on the fold
Front and back facing: cut two on the fold of fabric and two on the fold of interfacing
Pocket: cut four, leaving 1.5cm of fabric around the edge of the pattern
1.5cm seam allowance used throughout, unless otherwise stated.
